Power Leaded Resistors
BGR, BSR, BWR High Power
- BGR - rectangular type wirewound resistor with glass core
- BWR - rectangular type wirewound resistor with ceramic core
- BSR - rectangular type metal oxide film resistor
- Uses flame retardant insulated ceramic case
- Excellent in anti-pulse and inrush current
- Power rating: BWR: 1W ~ 20W, BGR: 5W ~ 40W, BSR: 2W ~ 20W
- Resistance range: 0.1Ω (BWR) ~ 56kΩ(BSR)
- Tolerance: ±1%, ±2%, ±5%, ±10%
- TCR: ±100ppm/°C (BWR), ±250ppm/°C (BGR), ±300ppm/°C (BSR)
BGRV, BSRV, BWRV Rectangular Type (For Automotive)
- BGRV - rectangular type wirewound resistor with glass core
- BWRV - rectangular type wirewound resistor with ceramic core
- BSRV - rectangular type metal oxide film resistor
- Uses flame retardant insulated ceramic case
- Excellent in anti-pulse and inrush current
- Power rating: BWRV: 3W ~ 60W, BGRV: 5W ~ 40W, BSRV: 3W ~ 20W
- Resistance range: 1Ω (BWRV) ~ 56kΩ(BSRV)
- Tolerance: ±5%, ±10%
- TCR: ±250ppm/°C (BGRV, BWRV) ~ ±300ppm/°C (BSRV)
GS High Voltage, High Resistance Thick Film, Power
- Miniature construction can endure high voltage (up to 40kV)
- Excellent anti-surge characteristics
- Maximum working voltage: 0.5kV ~ 40kV
- Maximum overload voltage: 1kV ~ 60kV
- Power rating: 0.25W ~ 12W
- Resistance range: 500K ~ 10GΩ
- Tolerance: ±0.5%, ±1%, ±2%, ±5%, ±10%
- TCR: ±100ppm/°C, ±200ppm/°C
HPC Ceramic Resistors for Anti-Pulse Surge Power
- Excellent in anti-pulse resistance, inrush current and active discharge characteristics
- Higher reliability against disconnection compared to wirewound and film resistors
- Maximum working voltage: 200V ~ 550V
- Maximum overload voltage: 400V ~ 1100V
- Power rating: 0.5W ~ 5W
- Resistance range: 3.3 ~ 390kΩ
- Tolerance: ±10%, ±20%
- TCR: -500ppm/°C ~ - 2200ppm/°C
MOS/MOSX Reduced Size Metal Oxide Power Type
- MOS/MOSX small size power type resistor
- Minimum dielectric withstanding voltage: 400V ~ 800V
- Power rating: 0.5W ~ 5W
- Resistance range: 0.1Ω (MOSX) ~ 100kΩ (MOS)
- Tolerance: ±1%, ±2%, ±5%
- TCR: ±300ppm/°C
PCF Ceramic Resistors for Anti-Pulse Surge Power
- Excellent in anti-pulse characteristics
- Higher reliability against disconnection compared to wirewound resistors and film resistors
- Maximum working voltage: 200V ~ 400V
- Maximum overload voltage: 400V ~ 800V
- Power rating: 0.5W ~ 2W
- Resistance range: 3.3 ~ 390kΩ
- Tolerance: ±10%, ±20%
- TCR: -500ppm/°C ~ - 2200ppm/°C
PSN, PV, PSO, PN, PWW, PAP High Voltage Power
- PSN can respond to high voltage surge (up to 400kV) and higher power (up to 250W) and has a wide resistance range (500Ω to 6GΩ)
- PSO is a completely moisture resistant version of PSN
- PN is non-inductive type and can be used for high frequency
- PWW resistors are a low-resistance alternative for PSN resistors
- PAP resistors are non-inductive wirewound resistors with inductance less than PWW; can be used for pulse wave measurement, impulse generators, etc.; and have the same dimensions as PWW resistors
- Maximum working voltage: 15kV ~ 300kV
- Impulse withstand voltage: 20kV ~ 400kV
- Power rating: 2W ~ 250W
- Resistance range: 10 ~ 6GΩ
- Tolerance: ±5%, ±10%, ±20%,
- TCR: ±200ppm/°C ~ ±3000 (R≥1GΩ), ±1000 (R<1GΩ)
RCR Anti-Surge Power
- Excellent anti-surge characteristics
- RCR50+, RCR50EN, and RCR60 (1M ~ 12MΩ) are discharge path resistors recognized by UL1676 and c-UL (CSA-C22.2 No. 1-M94)
- RCR25EN, RCR50EN (100k ~ 33MΩ), and RCR60 (100k ~ 56MΩ) are approved by EN62368-1 G.10 safety
- Absolute maximum working voltage: 500V ~ 5000V, 1150V(ac)
- Absolute maximum overload voltage: 1000V ~ 5000V, 1500V (ac)
- Power rating: 0. 25W ~ 3W
- Resistance range: 3.3 ~ 100MΩ
- Tolerance: ±1%, ±5%
- TCR: ±200ppm/°C ~ ±500ppm/°C
SPR Power Carbon Film
- High reliability performance
- SPRX - fixed metal film resistor available for low resistance
- Minimum dielectric withstanding voltage: 300V ~ 800V
- Power rating: 0.25W ~ 5W
- Resistance range: 0.1Ω (SPRX) ~ 110kΩ (SPR)
- Tolerance: ±1%, ±2%, ±5%
- TCR: ±350ppm/°C
